12- to 24-Inch

Rubber has always been a serious topic of discussion at WeThePeople. Not only is it the connecting point between your bike and what you’re riding, it also makes a huge difference as to how your bike feels. After the success of the Grippin' and Feelin' tires, WTP wanted a fresh new design based on the needs of the modern street rider. After a long process of testing compounds and refining the tread design, they came up with something quite special. The Stickin’ tire is the successful end result of over a year of hard work. It uses a specially designed shape and specific rubber compound that allows it to stick to nearly anything, yet enable you to grind endlessly without getting your tire stuck on the side of the rail or ledge. This 'street slick' beast was designed to grind and slide like nothing else.

Light up the track or street with the Torch! - Grooved slick center tread - Lightweight construction - Textured cornering knobs Originally designed as a race tire for modern BMX tracks, the Torch brings the heat to your competition.

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K1247 Amrak Tire - Clincher - Wire bead - 30tpi

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

With the increased strategical placement of Grip-Pods matched to multi-facet Nano Knobs on shoulder and sides, capped off with friction-enhancing chemical etching over the central tread, FASTR-X strikes the rarefied balance of speed and control like none before. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction - Multi-facet nano knobs provide additional traction on tire shoulders - ISO diameter: 451mm

- Kenda model K50 - A good, basic repair tire

- Tall knobs hold on loose terrain

Sharing the same versatile tread pattern as the Kwick Nine and Kwick Seven.5. Featuring K-Shield protection for puncture resistance and a reflective sidewall for better urban visibility, the Kwick Four is ready for your urban adventures! - Premium Trekking, Comfort, or Commuting tire - Front and Rear application - K-Shield (KS) is a layer of light, flexible rubber containing aramid and ceramic particles inside the tire under the tread area only. Designed to prevent punctures and increase tire life - Reflective stripe on sidewalls for added safety

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction - Multi-facet nano knobs provide additional traction on tire shoulders - ISO diameter: 406mm

Tom Dugan's signature Dugan tire features a fast center tread for park, street and dirt. - Dual ply casing

The Bunny Hop is a solid BMX contender with a uniform configuration of sipes and treads engineered for consistent traction when maneuvering between asphalt and pavement. Go ahead, shake that tail! - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

The Mirage tire is built on the premise of a super-lightweight tire that was strong enough for the toughest street riders. The Mirage uses a high-performance 120tpi casing and a specially designed dual compound tread that is smooth in the center, but with plenty of grip on the outer tread for traction and control while cornering and carving. The Mirage was also designed with street riders in mind and uses a full bead-to-bead “Silkshield” protection layer and a special outer ridge which acts like a bumper and prevents the sidewall getting damaged during grinds. - High-performance lightweight street tire - Dual-compound construction - Full-length "Silkshield" layer under tread and sidewalls for added protection - Specially designed tire tread with a smooth center tread for low rolling resistance and aggressive sides for traction and grip - Special outer line for grind protection - Made by Maxxis tires

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground

- New tread design, improved compound and quality workmanship - The Schwalbe One sets a new benchmark in terms of quality and performance

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

Drop. The. Hammer. - Grooved slick tread design - Lightweight casing While originally designed as a BMX race tire, the DTH has found success beyond the track, including street riding, pump track, skate park, and slopestyle. The grooved slick maximizes rolling speed by minimizing drag.

The Vault uses an all-condition tread pattern suitable for street, park and dirt riding. With a textured surface and slightly raised shoulder knobs, the Vault rolls fast without giving up traction. - Textured surface and slightly raised shoulder knobs for fast rolling and cornering traction

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 507 - Bead: Wire - PSI: 65

The Pathfinder is an incredible all-around tire that was originally created to meet the demands of the modern adventure rider. It has become so popular and well-received that we knew we had to offer it to riders of all ages. The Pathfinder youth is a versatile wire-bead tire with grippy cornering knobs for any conditions. Its fast-rolling slick center will make any sized rider the leader of the family peloton. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt. - Casing: 30 TPI - Bead: Wire - Compound: 70a for 12", 16", 18," and 20" Compound: 60a for 24" - Flat Protection: Flak Jacket for 12", 16", 18", and 20" - 18 x 2.0", PSI 35-65, approximate weight 460g

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

The Hellkat is an allround gravity tire and was developed with UR Team pro riders. An optimized tread design lets you rip across a wide range of conditions, never letting you down through sharp turns or aggressive braking. Equipped with a gravity, enduro or trail casing, the Hellkat is unimpressed by any sharp object you may encounter on your ride. Don't be just fast—be fast as hell! - The right casing for you—Choose between ATC for trails, AEC for enduro or AGC for a super strong casing and maximum flat protection. - The latest compound technology—Dual layer compound for extra grip and control, or dual tread compound for longer tread life. - Versatile—Tread design is optimized for a wide range of conditions balancing traction, handling and rolling speed. - Tubeless ready – Saves weight and provides a better rolling performance and more controlled handling. Riding tubeless also reduces the chance of flats.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair - Wire bead - 22tpi

Drop. The. Hammer. - Grooved slick tread design - Lightweight casing While originally designed as a BMX race tire, the DTH has found success beyond the track, including street riding, pump track, skate park, and slopestyle. The grooved slick maximizes rolling speed by minimizing drag.

A trail tire for your little shredder - Dual-Compound - SilkShield puncture protection The majority of kids' mountain bike tires are either overweight or under-gunned. The Snyper from Maxxis is the exception. The center knobs are ramped to decrease rolling resistance, but the aggressive side knobs will boost any little shredder's confidence in the turns. The Snyper uses our lightweight SilkShield material for puncture protection from bead-to-bead.

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

Designed by former World Champion, Olympic silver medalist and G.O.A.T contender Sam Willoughby, the Siren Pro offers BMX racers unparalleled performance on any track. Lightweight and fast-rolling, the 120 TPI, tubeless-ready tire rails turns, smooths out technical straightaways, and provides insane grip on the gate and out of corners. - Supple 120 TPI shaped casing - Center slick design for gaining maximum speed - Super-narrow gaps in the center tread grip the start gate without flexing - Wider gaps on the shoulder provide max grip when cornering

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

The Mike Aitken signature Aitken tire features a tread pattern for street and dirt and is ideal for use at high speeds. - Dual ply casing

The Current Tire has a grippy tread pattern, good shape and tire width. It's an affordable tire designed to make it easier for beginner riders to upgrade their bike and keep existing riders on their bikes. - Grippy tread pattern - Affordable high-pressure tire

An aggressively styled youth tire for all-condition riding, our Roller tire is the perfect tire for your kids to learn how to shred. - Casing: 22 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 12 x 2.125", PSI Max 40, approximate weight 280g

- Classic MTB tire with large, widely spaced knobs - Excellent for use on hardpack

- MTB tire suitable for road use with shallow, raised center knobs - Size: 24 x 2.125

- Durable mud tire with tall, aggressive lateral knobs - Wire bead

- Gray tread, sidewalls with raised center - 8 x 1 1/4

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 20 x 2.125

- Street/park tire with near rim-to-rim tread, tacky surface, medium grooved - Wire bead - Size: 12 1/2 x 2 1/4

- Entry-level Freestyle tire with durable casing to prevent pinch flats - Wire bead - Size: 16 x 1.75

The Speedster is a high performance race and dirt jump tire designed for speed and minimal drag on hard packed or paved terrain in wet or dry conditions. - Honeycomb center tread provides added traction and increased speed with very low rolling resistance; large diamond shaped side knobs give extra grip and cornering control - Large diamond shaped side knobs give extra grip and cornering control - Low Specific Gravity Compound is lightweight and designed for high speed

- Freestyle BMX tire

Box One™ 120 TPI Folding Tires were engineered with a minimalist approach to hit lofty goals for weight, traction, rolling resistance, and rebound. At its heart is a super-supple 120TPI casing where we forced in as much rubber displacing nylon as possible. Skin walls are employed to reduce drag and further reduce weight. We flanked the high-density casing with a tightly packed hoop of aramid fibers. Finally, we draped this all with BMX race-specific tread that transitions from a center band with a large contact patch to unidirectional tactile knobbies on the sides. This aggressive combination allows for maximum traction out of the gate, immense adhesion in the corners, and low rolling resistance in the straights. A state-of-the-art mixture of compounds is used in various areas of the apex, wall, bead seat, and center – with higher silica content in the tread to again remove more weight. Note: Not a tubeless tire FEATURES: - 120 TPI High-Density Casing - Aramid Folding Bead - High-Traction Directional Grooves for Starting Gate Grip Point - Low Rolling Resistance Center Strip Chevrons - Countless Ramped Hexagonal Directional Knobbies

Broc Raiford signature tire. Odyssey worked closely with Broc to dial in a tread that meets his riding needs while remaining simple and stylish. Odyssey's R-Grip rubber compound ensures superior grip and wear resistance. - Large Directional tread pattern - Odyssey R-Grip rubber compound - Superior grip & wear resistance - Micro knurling throughout - NOTE: Yes, it squeaks

Multi-Terrain tire designed for the GLOBE cargo bike family. The tire is great for around town, daily commuting, weekend travels, and wherever exploration takes you. Smooth center tread rolls silently while tall and strong shoulder knobs provide confidence if your route takes you off road. The casing is designed to carry high loads and has extra protection to prevent flats. - Bead: Wire - Flat Protection: Flak Jacket - 20 x 3.5, psi 15-35, approximate weight 1200g - Globe Haul replacement tube, 20 x 3.5-4.5 Schraeder Valve, SKU 03123-1000

An aggressively styled youth tire for all-condition riding, our Roller tire makes the perfect tire for your kids to learn how to shred. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 20 x 2.125", PSI 35-100, approximate weight 580g

- MTB tire suitable for road use with shallow, raised center knobs - Size: 20 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity

Micro-knurled blocky tread suited for a wide variety of terrain from street and park to hard pack trails and more. - Street/park tire, tacky tread with tightly bunched knobs - Wire bead - Size: 20 x 1.95

The Sunlite Revolotions is a street/cruiser tire with an all-around tread style. - Wire bead - TPI: 26

Sunlite's Street S-7 Tire is an urban tire with a raised center rib for reduced rolling resistance. - Size: 20 x 1-3/4 S-7 - ISO: 419 - Bead: Wire - PSI: 50 - Weight: 470g * not interchangeable with tires labeled "20 x 1.75"

- Cruiser tire with beveled diamond-shaped tread for traction - Flame design - Wire bead - Size: 24 x 3.0

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 24 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 18 x 2.125

Fast, safe and comfortable — guaranteed! The Contact is the jack-of-all-trades amongst city and trekking tires. Its tread design is based upon the principles of bionics. A uniform center tread/belt assembly ensures a smooth and speedy ride on the road. Flexible shoulder lugs and fine sipes guarantee grip in curves and on loose surfaces. The overall tire construction rounds off the overall high quality. The ultra fine carcass fabric reduces the rolling resistance while providing a noticeably more comfortable ride. Reflective Sidewall: REFLEX is 3M reflective is commonly known to be one of the most highly reflective material options. A thin, silver light-reflecting strip on both sidewalls that adds visibility and safety to Continental's city / commuter / urban tires.