Filter By:
- Parts & Accessories (45)
- Rollers (2)
- Trainers (11)
- Smart Trainers (14)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Indoor Cycling

$899.95
Bigger and Stronger for a Better Ride
Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session.
- Ride hard. This trainer can handle sprints up to 2,000 watts.
- Work up a sweat with inclines up to 16% that hold up to your most serious sprints.
- Accuracy matters. Measure your power to within 2.5%.
- Keep crushing it with your favorite apps, including Zwift and Tacx.
- Finally, a trainer that won’t wake the whole house when you ride hard.
ACCURATE AND RELIABLE
This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%.
READY TO SPRINT
The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts.
CLIMB HIGHER
Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient.
A MORE REALISTIC RIDE
At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness.
SMOOTH AND SILENT
This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available.
IMPROVED COMPATIBILITY
The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box.
HIGHLY COMPATIBLE
The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift.
ABLE TO STAND ALONE
You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance.
DEVICE COMPATIBILITY
Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time.
TACX TRAINING SOFTWARE
Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan.
TACX TRAINING PLANS
Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.

$1,399.95
The iconic, progressive, and popular NEO 2 Smart is optimized with an even quieter and more powerful Smart direct drive. The motor is redesigned in order to provide a better indoor cycling experience and ride feel, especially during climbs and sprints. The NEO 2T Smart is more silent than ever thought possible and is, without question, the most powerful, realistic, and accurate bike trainer to date.
- Improved air and mechanical stillness results in a nearly silent smart bike trainer with power and cadence accuracy within 1%
- New motor design creates enhanced ride feel during climbs and acceleration and when riding at low speed or cadence
- Now enables accurate pedal stroke analysis via compatible third-party software and Edge bike computers
- Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride
- Road feel feature lets you experience the sensation of different road surfaces, such as cobblestone and gravel
FEATURES
- Type of trainer: Interactive Smart direct-drive with motor brake
- Magnets: 32 Neodymium magnets
- Transmission: None
- Electrical requirements: 110-240 Volt, Main power optional
- Power indicator: Multicolor LED, Spot on floor
- Connection indicator (ANT/BT): 2 LEDs
- Firmware upgradable: Yes
- Suitable cassettes: Shimano & SRAM: 8 – 12 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately
- Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available
- Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software
SPECIFICATIONS
- Max. power (40 km/h): 2200 Watt
- Max. incline: 25%
- Simulation of descent: Yes
- Max. torque: 85 Nm
- Max. brake force: 250 N
- Flywheel: Virtual
- Mass inertia: Variable to 125kg (275.6lbs)
- Calibration: No calibration required
- Footprint (lxw): 575 × 750mm (22.6 × 29.5 in)
- Height: 550mm (21.7 in)
- Dimensions when folded: 620 × 260 × 440mm (24.4 × 10.2 × 17.3 in)
- Weight: 21.5 kg (47.3 lbs)
- Article number: T2875
DATA OUTPUT AND CONTROL
- Wireless communication: ANT+ FE-C, Bluetooth Smart open
- Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet
- Output: Cadence, Power, Speed
- Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet
- Error Tolerance: <1%

$529.99
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice.
This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride.
- Noise level is a quiet 69 decibels at 20 mph.
- PowerTuned using PowerTap technology for accurate power readings up to +/- 5%.
- This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm.
- Optional thru-axle adapter available for 142x12mm and 148x12mm.
- Integrated dual ANT+ FE-C and Bluetooth standards.
- Fast response electromagnetic resistance ensures most responsive resistance and maximum power available.
- Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade.
- Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2.
- Internally integrated speed, cadence, and power data eliminates the need for extra external sensors.
- LED indicator lights communicate connectivity and more.
- Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts.
- Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever.
- Features clutch knob for perfect roller to tire tension each ride.
- 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire.
- Does not fit 650c wheel sizes, nor all 29er tires.
- Precision-machined alloy roller reduces tire wear and slippage.
- Eccentric leveling feet allow for easy adjustment on uneven surfaces.
- Trainer tire recommended
- Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software.
- Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date.
- Some assembly required
- All of our trainers are tested to the combined weight (rider and bike) of 300 lbs.
- ANT+ and BlueGiga USB dongles sold separately
- Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter

$60.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

$19.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers
- NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

$69.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.

$39.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

$369.99
For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad.
- Wheel-on design sets up with two easy clicks and securely locks in place
- Measures speed, power, and cadence
- Virtually silent flywheel lets you ride without disturbing others
- Works with popular third-party training apps such as Zwift and Tacx
- Train with realistically simulated inclines up to a 7% gradient
FEATURES
Type of trainer: Interactive Smart trainer with electric brake
Magnets: 6 Magnets
Transmission: Roller, 30mm
Electrical requirements: 110-240 Volt
Power indicator: None
Connection indicator (ANT/BT): None
Firmware upgradable: Yes
Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire
Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available
Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
Max. power (40 km/h): 800 Watt
Max. incline: 6%
Simulation of descent: No
Max. torque: 15.3 Nm
Max. brake force: 45 N
Flywheel: 1.6 kg
Mass inertia: 11.8kg (26.0 lbs)
Calibration: Spin down
Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in)
Height: 410 mm (16.1 in)
Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in)
Weight: 9.41 kg (20.7 lbs)
Article number: T2240
DATA OUTPUT AND CONTROL
Wireless communication: ANT+ FE-C, Bluetooth Smart open
Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone
Output: Cadence , Power , Speed
Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet
Error Tolerance: <5%

$749.99
Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion.
- Measure your power within 3% error tolerance
- Next-to-silent direct drive trainer lets you ride without disturbing others
- Works with popular third-party training apps such as Zwift and Tacx
- Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts
- Sturdy design easily allows for riding full-out and standing on the pedals
FEATURES
Type of trainer: Interactive Smart direct drive with electric brake
Magnets: 8 Permanent ferrite magnets & 8 electromagnets
Transmission: None
Electrical requirements: 110-240 Volt
Power indicator: None
Connection indicator (ANT/BT): 2 LEDs
Firmware upgradable: Yes
Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately
Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available.
Suitable bikes: Race, Tri, & MTB
Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software
SPECIFICATIONS
Max. power (40 km/h): 1500 Watt
Max. incline: 10%
Simulation of descent: No
Max. torque: 22.1 Nm
Max. brake force: 65 N
Flywheel: 7kg
Mass inertia: 22.8kg (50.3 lbs)
Calibration: Spin down
Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in)
Height: 460mm (18.1 in)
Weight: 22.8kg (50.3lbs)
Article number: T2900S
DATA OUTPUT AND CONTROL
Wireless communication: ANT+ FE-C, Bluetooth Smart open
Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone
Output: Cadence, Power, Speed
Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet
Error Tolerance: <3%

$69.99
- Large and rollable trainer mat
- Made from high quality, water-repellent 6mm thick foam
- Protects your floor against scratches and sweat
- Muffles noise and vibrations
- 180 x 85 cm

$109.99
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.

$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

$109.99
With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.

$39.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

$299.99
Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride.
SIMPLE SETUP
With just two simple clicks, you'll be ready to ride.
SMALL BUT STABLE
This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride.
EASY TO STORE
Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position.
MAGNETIC BRAKE
You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it.
RESISTANCE CONTROL
A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts.
REALISTIC RIDE FEEL
An actual flywheel generates a realistic and smooth pedal stroke.
SMOOTH AND QUIET
The closed resistance unit reduces noise and makes for a smoother ride.
HOW FAR AND HOW FAST
Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps.
FEATURES
- Magnets: 2x8 Permanent ferrite magnets
- Transmission: Roller, 30 mm
- Electrical requirements: No voltage required
- Power indicator: None
- Connection indicator (ANT/BT): None
- Firmware upgradable: No
- Suitable bikes: Road, Tri, & MTB with skewer quick release
- Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
- Max. power (40 km/h): 1050 Watt
- Simulation of descent: No
- Max. torque: 17 Nm
- Max. brake force: 50 N
- Flywheel: Actual of 1.6 kg
- Mass inertia: 9.18 kg (20.2 lbs)
- Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in)
- Height 410 mm (16.1 in)
- Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in)
- Weight 8.53 kg (18.8 lbs)

$13.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions.
- Highly absorbent
- Measures 30cm x 115cm

$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

$185.39
- Smooth and powerful magnetic resistance
- Heavy-duty steel frame
- Folds for easy storage
- Fits MTB wheels 26"-29"

$272.99
Hook your bike up to Sunlite's F1 Trainer w/Remote and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel. The remote lever attaches to your handlebar for easy resistance adjustment. Plus, this trainer includes an easy-to-use steel quick-release lever.

$230.99
Hook your bike up to Sunlite's F2 Trainer and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel.

$759.99
No matter how busy you are, hop on Sunlite's F-5 Training Cycle and get a workout regardless of the weather outside. The fully adjustable design means you get a perfect seating position so you can perform at your peak, and the heavy-duty frame keeps flex to a minimum for awesome power transfer. Adjustable resistance allows you to tailor your workout, too, and the side-braking resistance design translates into longer bearing life. You can even track your time, speed, distance, calories, and total distance on the built-in computer. And when it's time to tuck the F-5 away, oversize wheels help you roll it across hardwood floors and even carpet.

$49.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
Page 1 of 3
Next page