Seat Bags

If you'd prefer to carry your gear in a bag rather than stretching out your jersey pockets, Banjo Brothers' Large Seat Bag is perfect for you. It'll hold a tube, tire levers, patch kit, a mini tool, your wallet, some food, even a wind vest or camera (each sold separately). And if you're going big, it expands to haul more gear. It's made from heavy-duty 840-denier nylon with a wide-opening design for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a blinkie.

The BiKASE Momentum family of saddle bags is the perfect complement to any ride. With a narrow and contoured design, the Momentum fits snugly between the seat post and saddle without interfering with the rider, and, with a double strap design, it couldn't be easier to install. Round that out with a taillight mount and reflective striping. - Reflective stripes - Internal mesh pocket - Internal elastic band - Strap light holder - Small: 25 cubic inches - Medium: 50 cubic inches - Large: 75 cubic inches - X-Large: 110 cubic inches (Black only)

The perfect balance between lightweight and capacity. Large enough to accommodate a spare inner tube, tire levers, multi-tool, a wallet, and keys. But compact enough for adventure. - Water resistant 1000D material with YKK zipper - Interior division for all your essentials - Reflective logo, webbing to clip light - Angled straps achieve a low profile fit - No-snag Velcro and Amara leather limit abrasion

- Bungee draw cord on top - Reflective piping - Tail light attachment - 53 x 19 x 18cm

- Fast-Fix straps allow fast and secure fixing to the saddle rails and seat post - Large reflective areas on all outward facing aspects - Full welded construction - Lightweight TPU/PU coated 420D nylon material - Tapered aero shaping with reduced strap bulk - Hidden air removal valve - Single, easy-open buckle Specs: Bag Dimensions in cm: 10x12x36 Bag Dimensions in inches: 3.9x4.7x14.1 Bag Attachment: Straps Bag Material: DeniersPolyethylene/Nylon Light Loop: Yes Waterproof: Yes

No rack, no problem. Banjo Brothers' Waterproof Saddle Trunk has a whopping 400 cubic inches of space with a waterproof main compartment and outer pockets for easy access to smaller items. A webbing loop on top lets you lash a jacket to the bag so you can reach it before the rain comes. An interior aluminum strut, stiff hull and 4-point strapping system control the load from bouncing, rattling or swaying. The best part is when you're done with your ride, you can remove it quickly and it works on pretty much any bike. - Weight: 1.25lbs - Dimensions: 12.5" L x 7" H x 6.5" W - Capacity: 400 cubic inches / 6.6 liters - Waterproof main compartment with replaceable welded liner - Outer pockets for easy access to money or keys - Webbing loop on top for attaching a rain jacket or other gear - Interior aluminum strut, stiff HDPE hull and 4-point strapping controls loads

Planet Bike's Little Buddy is the perfect friend to bring along on every ride. It's made of tough material and has a padded, white interior to protect, and make it easy to see your things. Its 44 cubic inches of capacity handle all your essentials. It's also got a diagonal zipper for easy access, a taillight strap (lights sold separately) and reflective piping for visibility.

Topeak's Wedge Pack II features a unique, positive locking mount that makes attaching and removing the pack a snap. A rain cover is included, if you get caught in a storm; just cover the pack and your belongings will stay dry. The Wedge is great for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, a 3M reflective stripe adds safety and its 1000-denier, Teflon-coated construction makes the Wedge Pack durable and tough.

So you like to keep your rig running minimalist but practical? The Road Bandit is the best of both worlds in terms of simplicity and utility for road riders. The patent-pending Road Tube Spool was integrated into the design, making it extremely user friendly. Its compact form bolts under your SWAT-compatible saddle and features a simple, Velcro strap and securely holds your tube, CO2, CO2 nozzle and tire lever (included). One rip of the strap and you're in, with everything you need to fix a flat when time is of the essence. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Fits up to 80mm-long tube valve stems. - Holds a single threaded 16g CO2 cartridge. - Patent-pending Tube Spool allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - Tire lever and CO2 head included; tube and CO2 cartridge sold separately. - Tough, lightweight, water resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts.

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes. This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

- M.O.L.L.E inspired anchor and strap system - Large tapered opening - Duraflex - Air removal valve - Tough 600D TPU/PU coated main fabric - Gear straps included - 6061 Aluminum construction adjustable rack included - CNC'd Seatpost clamp with multiple seat post size fittings

Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported

Banjo Brothers' Medium Seat Bag is perfect for carrying gear on any length ride. And if you're going big, it expands to haul even more gear. It's made from heavy-duty 840-denier nylon with a wide-mouth opening for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a light. - Weight: 5 oz. - Dimensions: 6.75" L x 4" W x 3" H unexpanded - Capcity: 65-81 cubic inches - Heavy duty 840 denier nylon construction - Wide-opening design for easier access - Flap hinges up from bottom to keep contents in place - 360 degree reflective accents - Web loop for light

A versatile bag designed to fit on handlebars or under the seat. - Reflective accents and webbing light holder. - Water-resistant zippers and oversized zipper pulls. - 4 3/4" x 8", 150 cubic inches

The Banjo Brothers Quick-Release seat bag. Remove your seat bag quickly with no fuss. Great for security and for using one bag across two or more bicycles. Easy on/off Twist tabs onto seat rails and then attach the seatpost strap. Two sizes. - Heavy duty 840 denier nylon construction - Cinch-strap to keep contents snug - Wide-opening design for easier access - Flap hinges up from bottom to keep contents in place - 360 degree reflective accents and web loop for light - Light loop - Fits most saddle rails

The City Saddle bag is designed for any folding bicycle. Constructed from waterproof fabrics, it comes in two sizes to accommodate a range of gear like clothing, off-the-bike footwear, or tools. Both sizes are tape-sealed and completely waterproof. The bag also features an extendable bottom stabilising strap which fits easily around the suspension block on all Brompton bicycles. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 110g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm