Parts & Accessories
All the parts needed to mount a Flux Elite headlight to a second bike. - Includes axle, handlebar clamp, stainless screws and 3mm Allen key. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.
Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
• 2 LEDs with 3-color variable automatic flashing • Attaches to the spokes on your wheel so it spins for high visibility • The Spoke Light is ready whenever you're riding • It turns on/off automatically when it's dark/light
- Rack mount bracket only - Fits TL-L225 taillight
2amp charger for the fastest charging possible of Specialized Flux lights - Has 2 standard size USB ports and will charge most USB devices. - Includes 4 interchangeable wall plug options and USB A to USB MINI B male to male charge cable. - Output: 10.5W 5V 2.1A Max Input: 100-204V AC 50/60Hz. 260mA
Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts
Replacement lens for Flux Expert Headlight. - Includes clear lens and gasket.
Do you have more than one bike? Get the most out of your Specialized Flux Expert tail light (sold separately) by getting an additional seatpost mount for easy switching between your rides. - All the parts needed to mount a Flux Expert taillight to a second bike - Includes mounting bracket, three interchangeable rings to fit different seatpost sizes and a 2.5mm Allen key. - Interchangeable rings will fit 27.2mm, 30.9mm, and Venge Aero seatpost.
Unlock all the functions of the Flux light with this two button remote. • Compatible with both the Flux Expert and Elite Headlights. • Lights up while the Flux headlight is on and repeats the Mode button and adds the Highbeam button (see Flux Headlight Manual for details) • Note: The remote is a "slave" unit and can turn a Flux headlight off but does not operate until the headlight has been turned on using the main button on the headlight.
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Mount it to your favorite downhill/MX style helmet, or explore the versatility of your Lumina headlight by mounting it onto an industrial hard hat. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
Helmet mount for all systems that use the slider mounting clip System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
Taillight Seat Stay Mount
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Page 1 of 3 Next page