Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Tools
$1,995.95
The BRK-1 is our ultimate mobile mechanic tool kit. This tailored selection of 100 professional-grade bike tools was carefully chosen by our team of experienced mechanics, with a comprehensive offering of the tools you'll need to adjust, replace, diagnose, and repair most components on a bicycle. Whether you're working in a professional race pit, neutral support tent at a local event, or the trailhead parking lot, you'll have the tools you need — and none of the tools you don't.
The BRK-1 was designed around our BX-3 Rolling Big Blue Box, a professional-grade toolbox for the professional bike mechanic. When open, the BX-3 is a neatly-organized display of your tool collection, featuring dual-sided pallets with hundreds of custom-designed loops and pockets. The BX-3 has room to grow your tool collection even when fully loaded with the contents of the BRK-1. When closed, the BX-3 is built for travel, with a tough weather-resistant outer shell, integrated wheels and an extendable handle.
- BX-3 Dimensions: 23.4"" x 17.3"" x 9.3"" (59.5 cm x 44 cm x 23.5 cm)
- Weight: 48.5 lbs (22 kg)
NOTE: Tool kit contents are subject to change.
$1,049.95
A professional level tool set designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in Park Tool's world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of their best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts!
Kit Includes:
- ATD-1.2 Adjustable Torque Driver
- AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm
- BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups
- BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive
- BO-2 Bottle Opener
- CC-4 Chain Checker
- CN-10 Professional Cable and Housing Cutter
- CNW-2 Chainring Nut Wrench
- CP-1.2 Cassette Pliers
- CT-3.3 Chain Tool
- CWP-7 Compact Universal Crank Puller
- DCW-1 Double-Ended Cone Wrench: 13/14mm (2)
- DCW-2 Double-Ended Cone Wrench: 15/16mm (2)
- DCW-3 Double-Ended Cone Wrench: 17/18mm
- DSD-2 Derailleur Screwdriver: Cross Tip
- DSD-4 Derailleur Screwdriver: Flat Blade
- DT-2 Rotor Truing Fork
- FR-5.2H Cassette Lockring Tool with Handle
- GSC-1 GearClean Brush
- HCW-15 36mm/32mm Headset Wrench
- HMR-8 Shop Hammer
- HT-8 8mm Hex Tool
- HXS-1.2 Hex Wrench Set
- LP-7 Utility Pliers
- MLP-1.2 Master Link Pliers
- MW-8 Metric Wrench: 8mm
- MW-9 Metric Wrench: 9mm
- MW-10 Metric Wrench: 10mm
- PAW-12 12" Adjustable Wrench
- PW-4 Professional Pedal Wrench
- RR-12 Tape Measure
- SW-0 Precision Spoke Wrench: .127"
- SW-2 Precision Spoke Wrench: .136"
- SZR-1 Shop Scissors
- TL-6.2 Steel Core Tire Levers
- TWS-1 Torx Compatible Wrench Set
$979.95
The PK-5 includes over 90 of our best shop tools selected with versatility in mind. A great way to outfit a pro bench or to set up a dream home workshop. The PK-5 is an impressive, professional set of specialty tools that can help you perform hundreds of bicycle repair and maintenance procedures. An investment you'll use and appreciate for decades.
Kit Includes:
- ATD-1.2 Adjustable Torque Driver
- AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm
- AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm
- BBT-10.2 Adjusting Cap Tool: For 8-Spline Hollowtech II
- BBT-22 Bottom Bracket Tool
- BBT-69.2 Bottom Bracket Tool
- BO-2 Bottle Opener
- CBW-1 Open End Wrench: 8/10mm
- CBW-4 Open End Wrench: 9/11mm
- CC-4 Chain Checker
- CN-10 Professional Cable and Housing Cutter
- CNW-2 Chainring Nut Wrench
- CP-1.2 Cassette Pliers
- CT-3.3 Chain Tool
- CWP-7 Compact Universal Crank Puller
- DAG-2.2 Derailleur Hanger Alignment Gauge
- DH-1 Dummy Hub
- DP-2 Threaded Dummy Pedal
- DSD-2 Derailleur Screwdriver: Cross Tip
- DSD-4 Derailleur Screwdriver: Flat Blade
- DT-2 Rotor Truing Fork
- FR-5.2H Cassette Lockring Tool with Handle
- GSC-1 GearClean Brush
- HMR-8 8 oz. Shop Hammer
- HXS-1.2 Hex Wrench Set
- MLP-1.2 Master Link Pliers
- NP-6 Needle Nose Pliers
- PAW-6 6" Adjustable Wrench
- PH-1.2 P-Handle Hex Wrench Set
- PW-4 Professional Pedal Wrench
- RR-12 Tape Measure
- SBC-1 Spoke, Bearing and Cotter Gauge
- SBS-1.2 Socket and Bit Set
- SCW-13 13mm Shop Cone Wrench
- SCW-14 14mm Shop Cone Wrench
- SCW-15 15mm Shop Cone Wrench
- SCW-16 16mm Shop Cone Wrench
- SCW-17 17mm Shop Cone Wrench
- SCW-18 18mm Shop Cone Wrench
- SCW-19 19mm Shop Cone Wrench
- SP-7 Side Cutter Pliers
- SW-0 Precision Spoke Wrench: .127"
- SW-2 Precision Spoke Wrench: .136"
- SWR-8 3/8" Drive Ratchet Handle
- SZR-1 Shop Scissors
- TL-1.2 Tire Lever Set
- TL-4.2 Tire Lever Set
- TL-6.2 Steel Core Tire Levers
- TWS-1 Torx Compatible Wrench Set
- UP-SET Utility Pick Set
- VC-1 Valve Core Tool
- ZP-5 5" Flush Cut Pliers
$631.95
Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693) for the adjustable and fixed cups, are available as accessories.
$579.95
Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+.
- Both uprights move simultaneously to always keep wheel centered in the stand
- Accommodates tire widths up to 5-inches+ with or without brake rotor mounted
- Speed knob to quickly change axle widths
- Accommodates hub widths from 75mm to over 250mm
- Precise operation and adjustability
- Built in thru-axle adaptors
- Machined, welded, assembled and calibrated in our factory in St. Paul, MN
- Chrome plated and powder coated heavy gauge steel construction
- Removable, replaceable nylon caliper tips to protect painted/anodized rims
$529.95
Built to withstand the punishment of travel and constant use and molded from impact resistant polypropylene, the BX-3 features pallets with 70% more surface area than the BX-2.2. Easily transportable with the integrated wheels and extendable handle, this case was designed with the help of some of the world's best mechanics for optimal form, function and longevity.
- Smooth rolling integrated wheels
- Extendable handle
- Dust and water resistant
- Air pressure compensation valve
- Custom designed tool-holding pallets with loops and pockets
- Gas assisted lid struts for easy opening
- Dual-sided upper and mid level folding pallet wings
- Front tool pallet that stores safely inside during transport
- Nominal dimensions: 23.4" x 17.3" x 9.3" (59.5 cm x 44 cm x 23.5 cm), 21.6 lbs. (9.8 kg)
$527.95
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups.
Includes:
• 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm)
• 690 facer
• Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading
SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.
$527.95
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard.
Includes:
• 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm)
• 690 Facer
• Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading
SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
$469.95
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.
- Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts
- Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles)
- Includes two facing cutters:
IS Mounts
Post and Flat Mounts
- Includes storage case
$429.95
The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups.
- 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs
- 8 installation drifts for standalone bearing installation
- Organized in a convenient storage case
- Full list of compatible bearing inner/outer diameters found on instructions/parts diagram
NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).
$389.95
The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets.
- Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm
- Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed
- Organized in a convenient storage case
$379.95
We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment.
Kit Includes:
- AWS-1 3-Way Hex Wrench
- BBB-4 Big Blue Book of Bicycle Repair
- CC-4 Chain Checker
- CM-5.3 Cyclone Chain Scrubber
- CN-10 Professional Cable and Housing Cutter
- CNW-2 Chainring Nut Wrench
- CT-3.3 Chain Tool
- DCW-1 Double-Ended Cone Wrench: 13/14mm
- DCW-2 Double-Ended Cone Wrench: 15/16mm
- DCW-3 Double-Ended Cone Wrench: 17/18mm
- DH-1 Dummy Hub
- DT-2 Rotor Truing Fork
- FR-5.2 Cassette Lockring Tool
- GSC-1 GearClean Brush
- HCW-16.3 Chain Whip/Pedal Wrench
- HXS-1.2 Professional L-Shaped Hex Wrench Set
- MLP-1.2 Master Link Pliers
- PAW-12 12" Adjustable Wrench
- RR-12 Tape Measure
- SD-2 #2 Phillips Screwdriver
- SD-3 3mm Flat Blade Screwdriver
- SW-0 Precision Spoke Wrench: .127"
- SW-2 Precision Spoke Wrench: .136"
- TL-1.2 Tire Lever Set
- TWS-3 Torx Compatible 3-Way Wrench
- VC-1 Valve Core Tool
$349.95
The BX-2.2 features updated pallet configuration and storage options to help you keep your tools secure and easily accessible. The expanded custom designed tool pallets, including dual-sided pallet wings, are all housed in a virtually indestructible composite travel case. Designed and built for the traveling mechanic who demands the best!
- Custom designed tool-holding pallets with loops and pockets
- Folding, dual-sided pallet wings
- Front tool pallet that stores securely inside during transport
- Dent-proof composite shell built around an aluminum frame
- Key lock
- Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg)
$344.95
- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs.
- Quick release design for fast tool installation and removal
- Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers
- Works with more than 20 different cartridge bearing sizes and multiple axle configurations
$305.88
Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread.
Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.
$305.32
Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.
$289.95
The BBP-1.2 quickly and accurately installs bottom bracket bearings, cups and adapters into press fit bottom bracket shells. The complete set of precision-machined bushings matches up with most common bottom bracket cup dimensions. The press assembly features a comfortable handle, oversized shaft, and magnetic back plate for quick and easy assembly.
- The complete set of precision-machined bushings match up with most common bottom bracket cup dimensions
- The press assembly features a comfortable handle, oversized shaft, and magnetic back plate for quick and easy assembly
- Magnetic quick-release design allows for fast installation and removal of tool
- Organized in a convenient storage case
- Compatible with bottom bracket shell widths from 68mm to 150mm
6 sets of precision-machined bushings (in 9 sizes) to fit these bottom bracket configurations:
- 386EVO
- BB30
- BB86
- BB90
- BB92
- BB95
- BB121
- BMX Mid
- BMX Spanish
- OSBB
- PF41
- Press Fit 24
- PressFit GXP®
- BBright™ Direct Fit
- PF30 BBright™ Press Fit
- Shimano® Press Fit
- All Press Fit DUB®
$289.95
The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely.
- Magnetic back plate for easy configuration and assembly
- Organized in a convenient storage case
Includes extractor cups/drifts for the following ODs:
- 16mm
- 17mm
- 19mm
- 20.6mm
- 21mm
- 22mm
- 22.3mm
- 24mm
- 26mm
- 28mm
- 28.6mm
- 30mm
- 32mm
- 35mm
Includes extractor studs and pilots for bearings with the following IDs:
- 8.5–9mm
- 10mm
- 12mm
- 12.7mm
- 15mm
- 17mm
- 20mm
NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.
$209.88 - $271.32
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter:
- 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm.
- 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets.
- 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
$262.95
Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.
$232.14
The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor.
NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.
$229.95
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.
$204.95
Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.
$126.40 - $202.18
Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information:
- 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard.
- 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard.
- 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone.
- 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter.
- 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor.
- 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.
$199.95
A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools.
The SK-4 includes:
- AWS-10 Fold-Up Hex Wrench Set
- BBB-4 Big Blue Book of Bicycle Repair
- CC-3.2 Chain Checker
- CN-10 Professional Cable and Housing Cutter
- CT-5 Mini ChainBrute Chain Tool
- FR-5.2 Cassette Lockring Tool
- GSC-1 GearClean Brush
- HCW-16.3 Chain Whip/Pedal Wrench
- HR-8 8mm Hex Wrench
- MLP-1.2 Master Link Pliers
- SD-2 Shop Screwdriver: #2 Phillips
- SW-7.2 Triple Spoke Wrench
- TL-1.2 Tire Lever Set
- TWS-3 Torx Compatible 3-Way Wrench
$189.95
Upgrades the DT-5 to the DT-5.2.
- Four telescoping axle adaptors
- Two stand off studs for Flat Mount alignment
- 12mm front fork thru axle sleeve
$167.95
The 37-piece SBS-3 from Park Tool is a comprehensive, shop-quality set of sockets, hex bits, and Torx compatible drivers selected specifically to tackle a wide variety of common bike repair needs. The SBS-3 also includes flat-faced sockets in common sizes for work on suspension forks. Ideal for use with Park Tool torque wrenches, the 3/8" drive bits and sockets are forged from tough, chrome vanadium steel and nickel chrome plated for lasting durability.
$159.95
Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite hex set, the THH-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included).
- Carefully selected combination of Chrome Vanadium and S-2 tool steels
- 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex wrenches included
- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless
- Machined, chamfered tips allow easier insertion into hex fittings
- Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or over-sized hexes fast and easy
- Sliding T-handle creates increased leverage and multiple access positions
- Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage
$156.95
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
- Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches
$155.95
The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance.
The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.
Includes:
- Two 20 mL syringes
- Two hose assemblies with shutoff clips
- One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems
- One open-ended hose assembly
- Bleed funnel with stopper
- Two 10 mm/12 mm universal bleed blocks
- Two 11 mm bleed blocks
- Two adjustable syringe holders
- M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2)
- M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2)
- M6 x 0.75 adapter — Magura®
- M6 x 1.0 adapters — universal (x2)
- M6 x 1.0 adapter — Promax®
- M7 x 0.75 adapter — Shimano®
- Hose compression sleeve — universal
- Fluid disposal bag
- Set of spare O-rings and hose
- Replacement parts available
- Brake fluid not included
NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.
Page 1 of 11
Next page