Parts & Accessories

$21.99
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure.
- Fits Presta/Schrader
- Accurate up to 160psi
- Shows PSI and bar
- Weighs only 37g

$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost
- Soft rubber block and Velcro loops hold pumps tightly

$22.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

$7.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.

$11.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

$79.95
Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure.
Specs
- PUMP HEAD COMPATIBILITY: Presta / Schrader pumps
- TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves
- GAUGE: Digital, 300 psi / 20.7 bar
- UNIT: psi, bar, kg / cm2
- BATTERY: CR2032 x 1 (included)
- THUMB LOCK: Aluminum
- PRESSURE TUNING: Air release button
- BODY: Aluminum / Engineering grade polymer
- SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7”
- WEIGHT: 102 g / 3.60 oz
Added Features:
- Rotatable head / gauge
- Auto-off function

$47.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

$32.95
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.

$17.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump.
- Material: Engineering grade plastic
- Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge
- Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I
- Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3”
- Weight: 30 grams / 1.06 oz
*Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

$4.95
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.

$5.00
Rebuild kit for the HP floor pump.
- Compatible with Air Tool HP floor pump.
- Includes O-ring, lube, and grommet.

$5.00
Rebuild kit for the MTB floor pump.
- Compatible with Air Tool MTB floor pump.
- Includes O-ring, lube, and grommet.

$5.00
Rebuild kit for our most common Air Tool floor pumps.
- Compatible with Air Tool Pro, Comp, and Sport floor pumps.
- Includes O-ring lube and grommet.

$8.00
Direct replacement head and hose for Comp MTB and HP floor pumps. Also works with Sport floor pump.
- Replacement head and hose for most Air Tool floor pumps.
- Compatible with Air Tool MTB, Comp, HP, and Sport floor pumps.

$12.00
90 Degree twist style mini CO2 head used on SWAT products
- Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow.
- Flow can be controlled or stopped by threading cartridge back into head.
- Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

$9.00
The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.
Page 1 of 3
Next page