Taillights

- Dynamo operated - Compatible with 6V E-bike battery - Integrated reflector - Mounting distance 50 mm - Visible from the side - 40g

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Small, compact, quick and easy - there's no reason not to grab a Cateye ORB for your next ride. The ORB pairs a sleek, compact design housed in an alloy chassis. Conveniently, the lens itself serves as the light’s operating switch and is protected from inadvertent triggers due to the housing’s design while still allowing for side visibility. The ORB is available in front and rear versions and both feature 3 separate operating modes. Installation is quick and easy thanks to the heavy-duty rubber mounting strap and the rear version features an angled mount for seat post use. - Simple, lightweight and compact safety set perfect for kids and adults seeking a little more visibility - Easy installation and push button operation - Universal mounting strap easily attaches to bars from 22mm to 32mm - Side cut outs provide visibility from a wide angle for additional safety - Powered by two CR2032 cells

Small, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm Modes/Run Time - Constant: 50 hours - Rapid flashing: 100 hours - Slow flashing: 100 hours

CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

USB Rechargeable, super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours

Long running battery-powered rear light with high waterproof rating of IPX7. Built-in "Brake Mode" function will alert others behind you of your deceleration. - Built-in acceleration sensor for Kinetic mode (Brake mode) - Automatically turns on Hi for 2.5 sec when bike deceleration is detected - Waterproof IPX-7: Operates even after 30 minutes of submersion in a depth of 1 meter - Long runtimes - 360 degree visibility - 5 LEDs - 3 modes - Mode memory function - FlexTight SP-11 bracket (Ø12-32mm) - Snap System - Flashing Mode: 160 Hrs - Constant: 70 Hrs - Rapid Mode: 140 Hrs

Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. - 3 LEDs (150 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (20 lumens):5 hrs - Flashing (15 lumens):70 hrs - Group Ride (50 lumens):11 hrs - Daytime Hyperflash (150 lumens):15 hrs

Pumping out an attention-grabbing 300 lumens with OptiCube lens technology, the versatile ViZ300 stands out with the power of Daytime Hyperflash mode and the friendliness of Group Ride mode. - 3 LEDs (300 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (30 lumens):5 hrs - Flashing (30 lumens):45 hrs - Group Ride (100 lumens):8 hrs - Daytime Hyperflash (300 lumens):10 hrs

When you absolutely, positively need to be seen, day or night, rain or shine, trust CatEye's brightest rear safety light. The ViZ450 features 5 LEDs, 300-degree visibility, OptiCube lens technology, and makes sure you stand out with the power of Daytime Hyperflash mode. - 5 LEDs (450 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (40 lumens):5 hrs - Flashing (40 lumens):65 hrs - Group Ride (130 lumens):10 hrs - Daytime Hyperflash (450 lumens):14 hrs

Packed in a sleek profile that complements your road bike, the Hotrod 50™ unleashes a powerful 50 lumens of radiant wide coverage. Its 6 attention grabbing modes keep motorists aware of your presence any time you’re on the road. Its Versatite™ flexible mount lets you attach the Hotrod 50™ tail light to most seat posts and seat stays, including aero styles. Performance - Powerful 50 lumens flashing - Low profile, compact size - USB rechargeable Li-ion battery - Low battery indicator - Water-resistant design - 1:30 ~ 100 hr run time - System Weight: 29g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles Patent pending. *Features and specs are subject to change without notice.

Engineered for the ultimate road cyclist, the Hotrod™ 90 unleashes a powerful 90 lumens of flashing output for unprecedented night and day cycling safety. Its cluster mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Be seen all the time with 24/7 Safety Technology™, an exclusive set of solid and flashing modes to increase your safety when cycling, night and day. Every bit the road cyclist’s tail light, the Hotrod 90 uses a Versatite™ flexible mount compatible with most seat posts including aero styles. Performance - 90 lumen red tail light with 6 lighting modes engineered for use on roads and commuting - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable, internal battery lasts up to 100 hours - Water-resistant design - 1:30 ~ 100 hr run time - System weight: 35g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles *Features and specs are subject to change without notice.

Made for the ultimate road cyclist, the HotrodTM 120 taillight unleashes a powerful 120 lumens of flashing output for unprecedented night and day cycling safety. High-intensity cluster-mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Using Cygolite’s 24/7 Safety Technology® with exclusive solid and flashing modes to increase your safety, the new Hotrod Rear 120 includes new Bzzz Flash mode to stand out even more both day and night. Every bit the road cyclist's tail light, the Hotrod 120 uses a VersatiteTM flexible mount that conveniently attaches to most seat posts including aero styles. Performance - 120 lumen red tail light with 7 lighting modes engineered for road cyclists - Continuous array of LEDs work in unison to shine an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable with 1:15 to 70 hours of run time, and 3 hour recharge time. Technology and Safety - Built-in 24/7 Safety Technology® gives you a powerful selection of 7 night and day modes (DayLightning® High Flash, High Steady, Group Low Steady, SteadyPulse®, Zoom, Bzzz Flash, Low Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - Zoom mode signals those around you with a gentle change in brightness - All-new on Hotrod, Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Low battery indicator alerts you when a charge is needed - Light mode memory saves the mode you're in before the light is turned off - VersatiteTM flexible mount conveniently attaches to seat posts including aerobars - Designed, engineered, and assembled in the USA RUN TIMES: - Group (low steady): 70 hr - High Steady: 1:15 hr - Zoom: 5 hr - SteadyPulse®: 5:30 hr - Low Flash: 30 hr - Bzzz Flash: 8 hr - DayLightning® Flash: 3 hr CHARGE TIME: - 3 hrs (depending on the charger used) MOUNTING: - Flexible seat post mount BATTERY: - Built-in Li-Ion SYSTEM WEIGHT: - 35g *Features and specs are subject to change without notice.

The most powerful line of single LED tail lights just got even brighter. Sporting an aggressive design and powerful output, the Hotshot Pro™ 200 is engineered from the ground up to stand out in the brightest of daytime and at night with intense 200 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. It even senses day and night, automatically adjusting the brightness of the flashing modes. Every bit the road cyclist’s tail light, its extra-wide beam lens maximizes your presence from afar, and its new low-profile flexible mount makes it easy to use on standard and aero seat posts. Get the most out of your ride with up to 210 hours of run time. (patent pending) - Powerful and efficient single LED blasts 200 lumen flashes (120 lm steady) - Engineered to make you stand out in broad daylight and at night - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the flash tempo of the flashing modes and the brightness of Steady mode with the simple 2 button interface (patent pending) - All flashing modes feature Adaptive Flash™ that sense day and night, automatically adjusting to the optimal brightness - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Enhanced Cycling Optics™ expands your presence with an extra-wide and long-range beam - USB rechargeable - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 54 grams - Flexible seat post mount fits most standard and aero seat posts - 2 ~ 210 hours of run time Patent pending. *Features and specs are subject to change without notice.

- 200 lumen single LED red tail light for use on roads and commuting - Built-in Enhanced Cycling Optics expands your visual presence with an extra wide and long range beam compared to typical lighting optics - 2-button design to adjust speed of each flash mode and brightness of Steady mode - Built-in 24/7 Safety Technology with 6 day and night modes (Steady, Zoom, SteadyPulse, Triple Flash, - DayLightning Flash, Random Flash) - SteadyPulse: steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - DayLightning: lightning-like flashes to highlight your presence in the brightest of daytime - Zoom: signals those around you with a gentle changes in brightness - Hard seat post mount and seat stay mount - Light mode memory saves the last mode you're in - Compact, durable and 59g - IP64 water resistant for use in all weather conditions - USB rechargeable with 2 to 210h runtime - Low battery indicator - Designed, engineered and assembled in the USA

250 lumens packed into an unbelievably compact form, the all-new Hypershot 250 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 250 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 250 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

Blaze MK3 With ReAKT And Peloton is a premium rear light that has all the versatility of various rear light technologies merged with a hefty run time. - Ambient Kinetic Technology (ReAKT) enables the light to automatically flare under braking and when entering areas of higher ambient light to create a contrast in brightness. Peloton mode dims rear light when a following rider's front light is detected - Optimized Mode Selector provides multiple programs for a choice of run times and modes so you can find the right one for your ride - DayBright flash pattern and side illumination for 360° visibility makes this an attractive package

Varia Smart Bike Lights help to create a safer riding environment by adjusting to changing light conditions as well as bike speed when paired with select Edge computers (sold separately). As ambient light fades or gets brighter, the tail light adjusts automatically when paired with a light-sensing Edge 1000 bike computer (sold separately). Whether you are training, commuting or just out for a pleasant evening ride with the family, Varia bike lights can adjust for speed and light conditions to put the light where you need it the most. Manual on/off controls allow you to use the lights for daylight rides as well. - Works independently and seamlessly integrates with compatible Edge cycling computers (sold separately) - As light conditions change, the smart Varia tail light automatically gets brighter or dimmer, when paired with a light-sensing Edge 1000 (sold separately) - Adjustments, including on/off, can be made manually with the use of an included remote - With 2 tail lights you can indicate impending right or left turns

See and Be Seen, Day or Night - Provides visual and audible alerts to warn of vehicles approaching from behind up to 153 yards (140 meters) away - Tail light offers daylight visibility up to a mile away and is visible within a 220-degree range, so drivers can see you well before the radar sees the vehicle - Sleek vertical design easily mounts to most road-use bicycles, including racing, touring and commuter styles - Requires a dedicated radar display unit or wirelessly integrates with compatible Garmin devices (sold separately) - Battery life: up to 15 hours in flashing mode or 6 hours in solid or night flash mode Ride smarter and more aware with Varia RTL510 rearview radar. Mounted neatly on the seatpost, it provides visible and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. Plus, the bright tail light is visible in daylight from up to a mile away, so you can ride with confidence and peace of mind. General Specs: - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, night flash, day flash - Lumens: 20 solid, 29 night flash, 65 day flash - Battery life: 6 hours solid, 6 hours night flash, 15 hours day flash - ANT+: Yes - Water rating: IPX7 - Viewing angle: 220° In The Box: Non-Bundle - Varia RTL510 - Mounting Kit - Cables - Documentation

The rebirth of an iconic bicycle light, the Frog Rear Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 20 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 60 hour runtime - Simple one-button operation - Available in 6 fun-loving colours

Describing this light as bright is a serious under-statement. Using new COB technology, Blinder X produces a punchy 100 lumens that will ensure you're seen and safe in all light conditions. It features a grid pattern that makes this Blinder one of Knog's most individual lights ever. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder X has integrated USB recharging, is 100% waterproof and has a whopping 60 hour run-time when using eco flash mode. - Dimensions: H: 43mm x W: 43mm x L:46mm - Weight: 34 grams - Charge Time: 4 hours - Lumens: 100 INTEGRATED USB PLUG No charging cable is required for your Blinder, its integrated USB plugs directly into USB ports. It has a charge time of 4 hours. When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. TOOL-LESS MOUNT Blinder lights comes with a tool-less removable silicone strap for bars and seat posts 22 – 32mm in diameter. A large strap is also provided that will fit tubes and head tube profiles with a circumference of up to 200mm. Knog's tool-less mounting system makes attaching your light incredibly simple and using silicone straps means there'll be no chance of damaging your bikes frame or beloved paint job. EASY ON, EASY OFF Removing your Blinder for charging or security purposes is a doddle with our handy clasp removal system. Strong enough to hold your light firmly in place when in use and big enough to use even when wearing gloves in colder conditions, this is a king amongst clasps. BLINDINGLY BRIGHT Producing 100 lumens of light output makes this Blinder a seriously bright option for any cyclist. Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time.

'Aero is everything,' and this is especially true with our Blinder V Traffic rear light. Using new COB technology, the Blinder V Traffic produces a punchy 100 lumen output, that will ensure you're seen and safe in all lighting conditions. It features a unique 3 block, traffic light style face pattern (all red) that makes the Blinder V Traffic one of Knog's most individual lights ever and the graphic flash pattern has 8 different light modes. The Blinder V Traffic is USB rechargeable, has an integrated USB-A connector, is 100% waterproof (IP67 rating) and has a whopping 50 hour run-time when using eco flash mode. - Dimensions: H: 51mm x W: 44mm x L:77mm - Weight: 40 grams - Lumens: 100 USB RECHARGEABLE WITH INTEGRATED CONNECTOR No charging cable is required for your Blinder V Traffic, its integrated USB plugs directly into USB ports. A full charge is achieved in 4 hours. When your Blinder is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. SIMPLE & SMART FASTENING SYSTEM The Blinder V Traffic comes with three silicone straps. A small strap for seat posts 22 – 27mm diameter, a medium strap for seat posts 27-32mm in diameter and a large strap that will fit tubes profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. EASY ON, EASY OFF Removing your Blinder V Traffic for charging or security purposes is a doddle with our handy clasp removal system. Strong enough to hold your light firmly in place when in use and big enough to use even when wearing gloves in colder conditions, this is a king amongst clasps.

Lil' Cobber Rear produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 50 lumens this Lil' Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension.

The Blinder Link Rear Bike Light is an innovative and powerful light designed to grab the attention of other road users, and be a pleasure to use. Available in two practical mounting options: Blinder Link Saddle mounts just below the saddle, keeping your seat post clear of clutter and placing your rear light at the best position for maximum visibility. Blinder Link Rack tackles the problem that using racks can often obscure the riders rear lights, mounting on the back of the rack. Blinder Link is an impressive bike light that's simple to use, while being stacked with innovative features that you'll love. - Specialized mounting system - 8 eye-catching modes - 100% waterproof with IP67 rating - Bright & punchy 100 lumen output - Be seen from over 1 km - USB-C rechargeable (cable not included) - Up to 50 hr runtime - Low battery & charge indicator - 'Rack' mount includes 2 brackets to fit 50mm and 80mm spacing.

The Blinder R-150 Rear Bike Light is a purpose-built light designed for road cyclists looking for maximum visibility over distance. Featuring 2 unique design elements the effectively aid visibility from afar: a strobe LED and a dedicated angle set LED, both these features have been designed to highlight riders from other roads users, particularly at long distance. Blinder R-150 is designed for cyclists that are looking for serious long-distance visibility. - Super bright 150 lumen output - A lightweight 48 grams - 9 eye-catching modes - 100% waterproof with IP67 rating - Side illumination via lens geometry - USB rechargeable battery - Integrated USB-A connector (cable-free) - Up to 50 hr runtime - Compatible with standard & aero seat posts - Low battery & charge indicator

Mid Cobber produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 170 lumens this Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

Big Cobber produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 270 lumens this Big Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 5.5 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 92 x 33mm - Weight: 59g

- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 12 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 10 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

- ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILTY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option - .20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

Safety is job #1 and the Vya Series delivers premium safety with the convenience commuters love. Vya Switch is the latest addition to the Vya Family, foregoing auto on/off technology for a traditional button design. Why the new design? We had multiple requests from riders who loved the power and simple effectiveness of our Vya taillight but wanted to adjust runtime or change to a solid mode for group riding and bike path commutes. The button control also allows cyclocross and mountain bikers who hit pavement en route to the dirt the ability to turn the light on/off as needed. Oh yeah, did we mention the purists who are so accustomed to manually turning their lights on and off that not doing so creates that 'Did I forget Something' feeling? Yes control freaks – Vya Switch is for you! - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Switch control provides multiple modes for longer runtime plus a solid mode perfect for bike paths/group rides - Designed for traditionalists, Vya Switch is turned on/off by button (does not have the auto on/off feature of other Vya Lights) - SafePulse beam pattern scientifically designed to enhance a passing driver's ability to judge the cyclist's distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - 100 lumen SafePulse output maintains safety for a full 6 hours; for all-day adventures switch to 50 lumen SafePulse mode for an impressive 12 hours runtime - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) - Lumens: 100 (high), 50 (medium), 25 (low), 100 (SafePulse) - Runtime: 360 min (high), 720 min (medium), 240 min (low), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 30 grams - Product Dimensions: 2.6" x 1.3" x 0.8" - Compatible Mounts: Seat Post

The future of cycling taillights is here. Vya is a game-changing design, blending powerful output with revolutionary smart features. The piercing 50 lumen output is easily visible over a distance of 1km, even in bright daylight. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya takes powerful safety lighting and keeps the rider safe so they can focus on the road ahead. Features - 50 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam pattern optimized to give a wide red swath of light that can be seen clearly from the rear and side ideal for city riding - An impressive 8 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 50 (SafePulse) - Runtime: 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

Tuck's powerful red pulse beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Tuck features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6 to 18V on-board batteries such as Shimano and Bosch systems, multiple mounting options creates the perfect e-Bike tail lighting solution. Key features: - 25 lumen taillight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - Taillight seat rail clamp with angle adjustment for universal mounting and effective visibility - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee

The most innovative bike taillight ever designed, Vya Pro blends ultra-powerful output with revolutionary smart features. The piercing 100 lumen beam is easily visible over an impressive distance of 2km, even in bright daylight. The Pro version builds on Vya’s innovations with a horizontal layout with custom engineered optic providing a concentrated burst of red light ideal for road riding in fast moving traffic. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. An optional seat rail mount is a great addition to the platform to get safety lighting even higher on the bike to be more in a driver’s line of sight. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya Pro is unmatched in the market for its power, compact design, and commuter convenience. Features - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - Impressive 6 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 100 (SafePulse) - Runtime: 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

The Vis 180 series redefined tail lights as the safest, most reliable platform available. The Vis 180 Pro continues this tradition by offering the brightest tail light on the market with a piercing 150 lumens of output. With a wide spread of red rear lighting combined with Light & Motion exclusive amber side lights for increased visibility at intersections, the Vis 180 Pro is the essential tail light for commuters. Featuring: - 150 Lumen output certified to the FL-1 Standard - Engineered with the highest-level CREE LED and enhanced firmware - Dual LED array to maximize visibility - Ultralight Aluminum body - Accurate battery charge and status indicator with 4 status levels - Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees - Secondary LED spreads amber light for 180 degrees of visibility - Simple ratchet in/out adjustability - Slide lock system allows you to easily take on / off without tools - Integrated clip for attaching to backpack or messenger bag; - Bike rack mount available and sold separately - Micro USB Rechargeable (Fully charges in 5 hours) - Low battery warning and auto shut-off to prevent damage - Multiple power settings - HiPulse: 6:00 / 150 - LoPulse: 12:00 / 75 - Solid: 4:00 / 150 - Paceline: 32:00/ 5 - Ultralight system weight: 102 grams - Designed and Assembled in California - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee Included: - Seat Post Mount, Micro USB Charging Cable

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included

Excellent side visibility and 20 lumens of output make the Octodon a bright, reliable taillight to ensure you'll be seen on your nighttime rides. - 270-degree visibility - Flash and constant mode - Tool-free mounting bracket - Also works clipped to a bag/waistband - 2 AAA batteries included

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty

Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)

Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!

Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.

Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.

-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams

The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams

Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.

With a dazzlingly bright 28 LED PB Power Array and three modes, this USB rechargeable light is like a Scarlet Begonia for the back of your bike. For added safety, it has a CPSC certified reflector in the lens to keep you visible when the light is off. Versatile mounting options allow you to attach it to your seat post or rear rack with the included brackets. - PB 28 LED power array and CPSC certified reflector provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm) and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams

The 65R is the Superflash tail light on steroids. The Cree XBD LED delivers 65 lumens of brilliance and 220° of visibility to get you noticed day and night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 7 hrs (high – 30 lm), 12 hrs (low – 7 lm), 5.5 hrs (Courtesy - 13-40 lm) and up to 11.5 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP65 standard - 550 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Smart Charging Technology with built-in low battery indicator - Includes Quick Strap seat post mount - 52 grams