Parts & Accessories

Switch your TWIST Bottle from bike to bike with an extra TWIST Bike Base. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your Bike Base. Compatible with all TWIST Bottles. - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bottles

TWIST Bottle Connector for TWIST 450, 590, 600, and 750 Bottles. Not compatible with TWIST 800 or KEEGO Bottles. Easily attach your new connector by placing it in the Connector indent on your Bottle and locking it in with a coin. Replace your connector on your existing set or add to a Replacement Bottle. - Compatible with TWIST 450, 590, 600, and 750 Bottles - Not compatible with TWIST 800 or KEEGO Bottles - Compatible with all TWIST Bases: Bike Base, Tex-Base, and Uni-Base

If your thread inserts are already blocked or your bike does not even have any, the TWIST products can be mounted to the bike with the TWIST uni base, the universal bottle holder. It can securely fastened with the aid of two zip ties. On the top tube, the down tube, or the saddle tube – the TWIST uni base can be attached anywhere on the frame. - Compatible with frame tubes with a width of 28-62 mm - Rubber back for frame protection - Compatible with all TWIST Bottles - Attach and detach with ease

Thanks to the modular TWIST system an exchange of the single parts is done in no time. If base and replacement bottle are still at hand, the TWIST bottle connector is also available separately. The bottle connector is suitable for all TWIST bottles with a belt as well as TWIST bases. Fitting the new connector is simple: insert the connector into the recess of the TWIST replacement bottle and lock with a coin. - Suitable for all TWIST bottles with a belt - Fits all TWIST bases

- Universal bar mount bottle cage adapter fits 22.2-35mm diameters - Can be adjusted to any angle using the provided 4mm hex wrench - Tough nylon composite construction - Bottle cage not included

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - Blaster high-flow bite valve w/ shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside pack - Molded 3D bottom for much better drying between rides

Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

The Elite is a revolutionary reversible bladder. The design of the Elite allows users to easily maintain cleanliness. The patented wide slide top opening allows for fast filling and secure seal. To clean, simply slide open, reach in, reverse, and rinse. The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45 degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube. The hydration system is reversible for easy cleaning and drying. The hydration bladder has a patented wide slider opening for quick filling and leak proof seal and also has RF welded seams to create superior bonds at a molecular level. The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials. It is also dishwasher safe and is naturally Anti-fungal. This product is made by Hydrapak LLC for USWE Sports AB.